Convertir a region 4 dvd daewoo
Tengo un dvd player daewoo modelo DVG 3000N donde lo compre me dijieron que era multiregion pero solo reproduce dvd region 1 y los que dicen all, me gustaria me dijieras como convertirloa region 4 o que fuera multiregion verdaderamente. Te agradeceria bastante gracias
1 Respuesta
Respuesta de solobrio
1
Esto es lo que tengo para esa marca y modelo, esta en ingles, espero que te sirva.
We take no responsibility for damages caused by following these instructions.
To hack your Daewoo DVG-3000N player, simply follow these instructions:
1. Turn the player on
2. Press Open\Close, to open the tray
3. Press Setup on the Remote Control
4. Press Play
5. Choose TV Type in the menu with Remote Control
6. Press Stop on the players front panel (NOT from the Remote)
7. Press |< (Prev) on the players front panel
8. Press >| (Next) on the players front panel
9. The Region ID menu should come up
10. Select the desired Region (with Remote Control) setting to Bypass for Region free
11. When you have selected the desired Region press Play
12. Now press Setup on the Remote
You could also try this if the above fails:
1. Power On
2. Insert a disk
3. On the Remote Control press:
STOP twice (full Stop)
Setup
Ii (still, pause)
Previous
NEXT
4. The "FACTORY CONTROL PAGE" Menu will appear on the Screen
5. Move to REGION CODE with Arrow/Direction Buttons on the Remote Control and press PLAY
6. Press SETUP
We take no responsibility for damages caused by following these instructions.
We take no responsibility for damages caused by following these instructions.
To hack your Daewoo DVG-3000N player, simply follow these instructions:
1. Turn the player on
2. Press Open\Close, to open the tray
3. Press Setup on the Remote Control
4. Press Play
5. Choose TV Type in the menu with Remote Control
6. Press Stop on the players front panel (NOT from the Remote)
7. Press |< (Prev) on the players front panel
8. Press >| (Next) on the players front panel
9. The Region ID menu should come up
10. Select the desired Region (with Remote Control) setting to Bypass for Region free
11. When you have selected the desired Region press Play
12. Now press Setup on the Remote
You could also try this if the above fails:
1. Power On
2. Insert a disk
3. On the Remote Control press:
STOP twice (full Stop)
Setup
Ii (still, pause)
Previous
NEXT
4. The "FACTORY CONTROL PAGE" Menu will appear on the Screen
5. Move to REGION CODE with Arrow/Direction Buttons on the Remote Control and press PLAY
6. Press SETUP
We take no responsibility for damages caused by following these instructions.
muchas gracias si se pudo,oye tambien en contre una pagina donde puedes bajar los comandos para accesar al "menu de fabrica " para la mayoria de los DVD la pagina es: http://www.vcdhelp.com/dvdhacks.php
