How to fix canon printer b200 error?
In this article, you'll learn by yourself how to repair canon printer error b200. Typically, any printer's fault means that the print head has died the voltage of the print head, or the temperature of the print head is not natural. In some instances, the b200 mistake often indicates that the print head was impaired and could not use. Or the cartridges do have a problem.
The Canon printers come in two cartridges or 4 +. If you have four rounds or more on your printer, you will have to follow the steps below. If you have a two cartridge printer, skip to the segment below.
Step 1: Remove all moulds. Open your printer's lid, and the cartridge cradle will begin moving into the correct position to remove. Detach all of your cartridges from individual printers.
Step 2: Remove the head to print. Since the print head is affected, we have to lift the orange/grey locking lever on the side of the cartridge cradle to remove the print head. It will allow easy removal of the head of print.
Step 3: Reinstall the head for print. Clean the head of the edition and put it back in their original position. Make sure it stays firmly in place.
Stage 4: The cartridges reinstall. Place all the rounds in their slots correctly, and lock any open doors. The printer will start reading and printing heads on the cartridges.
Step 5: Boot the printer again. Remove from the power source the printer cable, and leave it for a few minutes. It will cool down the print head and the cartridge slots. Place the device back into the socket for the wall.
Step 6: Do a Nozzle check. The canon printer error b200 happens when the printer uses the print head. So, perform a nozzle check to make sure that the correct cartridge has replaced with the nozzle check. Once it is confirmed, you can proceed to use your printer regularly.
If the problems not fixed, you will need to replace the print head with a new one.
After knowing what you have to do when you have a printer with two cartridges now, let's discuss the Printer troubleshooting steps for the canon printer B200 error.
Printer troubleshooting steps of printer error B200
To solve printer error problem do follow the mentioned steps which are given below;
- Firstly, you need to reset the printer.
- If any obstruction were present, then, remove it.
- By using your PC's printer maintenance options clean printer head.
- Ensure you will clean the print head manually clean the print head.
- Then, remove the old ink.
- After that reinstall your drivers of the printer.
- Later, try a new ink cartridge.
- In case if none of those mentioned above methods works, then the B200 error is probably valid.
This is some major printer service solutions we have for you. We ensure you that by applying these methods, you can solve Canon Printer error B200. Still, if you face any trouble then, visit the service centre of your printer. Read our new blog
brother printer offline fix
