Macrovision

Sigue esto pasos segun el modelo de tu DVD, finaliza la pregunta evaluandola segun tu criterio.
Daewoo DV-115
To make this machine Region free:
Remove any discs in the machine
Press the Open/Close button on the front of your DVD (Open lid)
On the Remote Control key in 8, 9, 2, 6
Wait for five seconds
Press 0 on the Remote Control
Wait for 15 seconds
Press the Open/Close button on the front of your DVD (Close lid)
Daewoo DHC-2300
This modification should work on the Daewoo DQD-2000, DHC-2200, Scan SC-2000 and Manhattan DVD-2000.
To convert this player to Multi-Region on earlier firmware versions:
Press the Setup button on the Remote Control
Press the Title button
Press the Step button
Press the Next button
Using the Up and Down buttons on the Remote, select the Region of your choice or Bypass for Region free
Save and then Exit the menu
To convert this player to Multi-Region on later firmware versions:
Press the Open button on your Remote Control
Press the Setup button
Press the 9 button for Region Free, or 1 for Region 1, 2 for Region 2, and so on
Press the buttons 2, 0, 1 and then 0 on your Remote, or if this doesn't work, try pressing the buttons 3, 0, 1 and then 0
Press the Step button
Press the Shuffle button
Press the Next button
To check the current region setting of this player on later firmware versions:
Press the Open button on the Remote Control
Press the Setup button
Press the Shuffle button
Press the Step button
Press the Next button
A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the current region status is displayed
To fix low sound output volumes when connecting to your TV via SCART on later firmware versions:
Press the Setup button on the Remote Control
Press the Stop button
Press the Step button
Press the Angle button
The word RFOUT will appear on screen briefly and the sound will now have been adjusted to normal levels
A secret menu will appear, inside which you can scroll down until the words Debug Item appears, where the current region status is displayed
Daewoo DS-2500N
To change this players Region:
Turn the DVD player on
Open the tray, do not insert a disc
Press Setup on the Remote Control
From the menu, choose Parental Control. Once highlighted press OK on the Remote
On the Parental Control menu, choose Defaults, then highlight Reset (do not press OK at this point)
While Reset is highlighted, enter, with the Remote Control, the following codes to change Region or make the player Region free, 5270 for Region free, 5271 for Region 1 (US & Canada), 5272 for Region 2 (Europe, etc.)
After entering the code you want, if it was properly entered, you will see the words:
REGION:FREE (if you chose code 5270), REGION:1 (code 5271) etc.
Then press Ok on the Remote
You will then see a Password Verify screen, enter 0000 and then press OK
Finally, press Setup to exit
Daewoo DVG-3000N
This hack should also work on the Daewoo DVG-5000D
To change Region or make this player Region free follow these steps:
Turn the player on
Press Open/Close, to open the tray
Press Setup on the Remote Control
Press Play
Choose TV Type in the menu with Remote Control
Press Stop on the players front panel (NOT from the Remote)
Press |< (Prev) on the players front panel
Press >| (Next) on the players front panel
The Region ID menu should come up
Select the desired Region (with Remote Control) setting to Bypass for Region free
When you have selected the desired Region press Play
Now press Setup on the Remote
You could also try this if the above fails:
Power On
Insert a disk
Press Stop twice (full Stop)
Press Setup
Press II (Still/Pause)
Press Previous
Press Next
The "Factory Control Page" Menu will appear on the Screen
Move to Region Code with Arrow/Direction Buttons on the Remote Control and press Play
Press Setup
Daewoo DVG-5000N
To change Region or make this player Region free follow these steps:
Go here to upgrade the firmware and then using the Remote press the following buttons:
Setup
Stop
|<< Track backward
|>> Track forward
Enter the Region selection option and select bypass for multi-region
Daewoo DVD-5700
This hack should also work on the Daewoo DVD-5800
How to make the player Region and Macrovision using remote sequence:
Open/Close (tray open)
Setup
Shuffle
Step
Next
You should be able to see the secret menu and scroll down to DEBUG and the list shows from 1-9 (which is regions). Option 9 is region free/bypass. Well by default 1 is ticked and will not able to change permanently.
Here is the solution to change the Region code:
Open/Close
Setup
X 3 0 1 0 (X your choice of Region 1-9)
Step
Shuffle
Next
Go to secret menu and check the Region you set. You can change to any Region by following the above steps.

No de DVDs, así que ve a otra categoría... bye Link4ever ;)