Nero. SCSI/ATAPI command timeout error
Tengo una ACER 10x8x32 y uso el Nero 5.5. Mi problema es que una vez que lleva un tiempo realizando la grabacion del CD (mas o menos hacia la mitad del proceso), de repente se para tanto el HD como la grabadora y deja de realizar la grabación. Aparece el mensaje del titulo y..., otro bonito posavasos para la coleccion. Uso el Windows Millenium y creo que tengo los drivers ASPI actualizados. ¿De dónde puede venir el problema?.
Incluyo el texto del log.txt creado por NERO. Gracias por adelantado.
PD: Este problema me surge tanto a 2x, 4x como a 6x
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 16/10/2001 19:12:16
Nero Version: 5.5.4.0
Recorder: <ATAPI CD-R/RW 10X8X32> Version: 8.HZ - HA 0 TA 0 - 5.5.4.0
Adapter driver: <ESDI_506> HA 0
Drive buffer : 4096kB
CD-ROM: < LG CD-ROM CRD-8360B>Version: 1.01 - HA 0 TA 1 - 5.5.4.0
Adapter driver: <ESDI_506> HA 0
ATAPI CD-R/RW 10X8X32 (Target 0, D:): Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer On
LG CD-ROM CRD-8360B (Target 1, E:): Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer On
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130488kB)
Free physical memory: 11MB (12036kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off
CD-ROM (ISO)
20.10.2001
0:19:44 #1 Phase 87 File dlgbrnst.cpp, Line 1348
Seamless Link activated
0:19:44 #2 Text 0 File Reader.cpp, Line 117
Reader running
0:19:44 #3 Text 0 File Writer.cpp, Line 122
Writer CD-R/RW 10X8X32 running
0:19:44 #4 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)
0:19:44 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 326758 (326758) = #326758/72:36.58
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
0:19:49 #6 Text 0 File DlgWaitCD.cpp, Line 1164
Recorder: ATAPI CD-R/RW 10X8X32;
CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4A 2B 00 (LO 74:43.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
0:19:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R/RW 10X8X32 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 669507584
0:19:49 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.
0:19:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 326758 (326758) = #326758/72:36.58
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 326756 blocks [CD-R/RW 10X8X32 ]
--------------------------------------------------------------
0:19:49 #10 Phase 24 File dlgbrnst.cpp, Line 1348
Caching of files started
0:20:13 #11 Phase 25 File dlgbrnst.cpp, Line 1348
Caching of files completed
0:20:13 #12 Phase 32 File dlgbrnst.cpp, Line 1348
Simulation started at 6x (900 KB/s)
0:20:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1841
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
0:20:13 #14 Text 0 File Mmc.cpp, Line 13988
Set BUFE: Seamless Link -> ON
0:26:34 #15 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 01 E9 38 00 00 1F 00 00 00
0:26:34 #16 CDR -1175 File Cdrdrv.cpp, Line 1222
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
0:26:34 #17 SCSI -26 File Cdrdrv.cpp, Line 1253
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x21020000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:34 #18 SCSI -26 File Cdrdrv.cpp, Line 1308
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x21020000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:34 #19 CDR -26 File Writer.cpp, Line 308
SCSI/ATAPI command timeout error
0:26:34 #20 Text 0 File ThreadedTransfer.cpp, Line 218
all writers idle, stopping conversion
0:26:35 #21 Text 0 File ThreadedTransfer.cpp, Line 212
conversion idle, stopping reader
0:26:45 #22 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00
0:26:45 #23 SCSI -1000 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:45 #24 CDR -1175 File Cdrdrv.cpp, Line 1120
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00
0:26:45 #25 SCSI -26 File Cdrdrv.cpp, Line 1148
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:55 #26 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00
0:26:55 #27 SCSI -1000 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:55 #28 CDR -1175 File Cdrdrv.cpp, Line 1120
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00
0:26:55 #29 SCSI -26 File Cdrdrv.cpp, Line 1148
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00...
Incluyo el texto del log.txt creado por NERO. Gracias por adelantado.
PD: Este problema me surge tanto a 2x, 4x como a 6x
Windows 98 4.90 (ME)
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1017), size=48128 bytes, created 16/10/2001 19:12:16
Nero Version: 5.5.4.0
Recorder: <ATAPI CD-R/RW 10X8X32> Version: 8.HZ - HA 0 TA 0 - 5.5.4.0
Adapter driver: <ESDI_506> HA 0
Drive buffer : 4096kB
CD-ROM: < LG CD-ROM CRD-8360B>Version: 1.01 - HA 0 TA 1 - 5.5.4.0
Adapter driver: <ESDI_506> HA 0
ATAPI CD-R/RW 10X8X32 (Target 0, D:): Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer On
LG CD-ROM CRD-8360B (Target 1, E:): Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer On
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130488kB)
Free physical memory: 11MB (12036kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off
CD-ROM (ISO)
20.10.2001
0:19:44 #1 Phase 87 File dlgbrnst.cpp, Line 1348
Seamless Link activated
0:19:44 #2 Text 0 File Reader.cpp, Line 117
Reader running
0:19:44 #3 Text 0 File Writer.cpp, Line 122
Writer CD-R/RW 10X8X32 running
0:19:44 #4 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)
0:19:44 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 326758 (326758) = #326758/72:36.58
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
0:19:49 #6 Text 0 File DlgWaitCD.cpp, Line 1164
Recorder: ATAPI CD-R/RW 10X8X32;
CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4A 2B 00 (LO 74:43.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
0:19:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R/RW 10X8X32 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 669507584
0:19:49 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.
0:19:49 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 326758 (326758) = #326758/72:36.58
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 326756 blocks [CD-R/RW 10X8X32 ]
--------------------------------------------------------------
0:19:49 #10 Phase 24 File dlgbrnst.cpp, Line 1348
Caching of files started
0:20:13 #11 Phase 25 File dlgbrnst.cpp, Line 1348
Caching of files completed
0:20:13 #12 Phase 32 File dlgbrnst.cpp, Line 1348
Simulation started at 6x (900 KB/s)
0:20:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1841
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
0:20:13 #14 Text 0 File Mmc.cpp, Line 13988
Set BUFE: Seamless Link -> ON
0:26:34 #15 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 90000ms, CDB Data[hex]: 2A 00 00 01 E9 38 00 00 1F 00 00 00
0:26:34 #16 CDR -1175 File Cdrdrv.cpp, Line 1222
Internal trace
Command timeout occured: timeout 90000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
0:26:34 #17 SCSI -26 File Cdrdrv.cpp, Line 1253
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x21020000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:34 #18 SCSI -26 File Cdrdrv.cpp, Line 1308
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x21020000
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0xE9 0x38 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:34 #19 CDR -26 File Writer.cpp, Line 308
SCSI/ATAPI command timeout error
0:26:34 #20 Text 0 File ThreadedTransfer.cpp, Line 218
all writers idle, stopping conversion
0:26:35 #21 Text 0 File ThreadedTransfer.cpp, Line 212
conversion idle, stopping reader
0:26:45 #22 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00
0:26:45 #23 SCSI -1000 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:45 #24 CDR -1175 File Cdrdrv.cpp, Line 1120
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00
0:26:45 #25 SCSI -26 File Cdrdrv.cpp, Line 1148
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:55 #26 Text 0 File Scsicmd.cpp, Line 1883
SCSI timeout (2), 10000ms, CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00
0:26:55 #27 SCSI -1000 File Cdrdrv.cpp, Line 1101
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
0:26:55 #28 CDR -1175 File Cdrdrv.cpp, Line 1120
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00
0:26:55 #29 SCSI -26 File Cdrdrv.cpp, Line 1148
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00...
1 respuesta
Respuesta de lical
1
Asegurate de que tienes el aspi actualizado. Te recomiendo también que actualices nero a la última versión descargable en www.550m.com/usuarios/psxcandi/nero.htm lo cual puede solucionar tu problema.
Si probases con otro software de grabación quizás esto desaparecería. Deberías intentarlo.
Prueba a defragmentar el disco duro y a activar "DMA" tanto en lector como en grabadora. De todas formas, con windows 9x o Me, nunca se sabe...
Alguna de estas opciones resolverá tu problema. Si alguna duda más, ya sabes, pregúntame.
Mientras tanto.
Si probases con otro software de grabación quizás esto desaparecería. Deberías intentarlo.
Prueba a defragmentar el disco duro y a activar "DMA" tanto en lector como en grabadora. De todas formas, con windows 9x o Me, nunca se sabe...
Alguna de estas opciones resolverá tu problema. Si alguna duda más, ya sabes, pregúntame.
Mientras tanto.
